10 Search Results

The ATLAS experiment at the Large Hadron Collider explores the use of modern neural networks for a multi-dimensional calibration of its calorimeter signal defined by clusters of topologically connected cells (topo-clusters). The Bayesian neural network (BNN) approach not only yields a continuous and smooth calibration function that improves performance relative to the standard calibration but also provides uncertainties on the calibrated energies for each topo-cluster. The results obtained by using a trained BNN are compared to the standard local hadronic calibration and to a calibration provided by training a deep neural network. The uncertainties predicted by the BNN are interpretedmore » in the context of a fractional contribution to the systematic uncertainties of the trained calibration. They are also compared to uncertainty predictions obtained from an alternative estimator employing repulsive ensembles.« less

This paper presents updated Monte Carlo configurations used to model the production of single electroweak vector bosons (W, Z/γ$$^{∗}$$) in association with jets in proton-proton collisions for the ATLAS experiment at the Large Hadron Collider. Improvements pertaining to the electroweak input scheme, parton-shower splitting kernels and scale-setting scheme are shown for multi-jet merged configurations accurate to next-to-leading order in the strong and electroweak couplings. The computational resources required for these set-ups are assessed, and approximations are introduced resulting in a factor three reduction of the per-event CPU time without affecting the physics modelling performance. Continuous statistical enhancement techniques are introducedmore » by ATLAS in order to populate low cross-section regions of phase space and are shown to match or exceed the generated effective luminosity. This, together with the lower per-event CPU time, results in a 50% reduction in the required computing resources compared to a legacy set-up previously used by the ATLAS collaboration. The set-ups described in this paper will be used for future ATLAS analyses and lay the foundation for the next generation of Monte Carlo predictions for single vector-boson plus jets production.[graphic not available: see fulltext]« less

The semiconductor tracker (SCT) is one of the tracking systems for charged particles in the ATLAS detector. It consists of 4088 silicon strip sensor modules. During Run 2 (2015–2018) the Large Hadron Collider delivered an integrated luminosity of 156 fb^₋1 to the ATLAS experiment at a centre-of-mass proton-proton collision energy of 13 TeV. The instantaneous luminosity and pile-up conditions were far in excess of those assumed in the original design of the SCT detector. Due to improvements to the data acquisition system, the SCT operated stably throughout Run 2. It was available for 99.9% of the integrated luminosity and achievedmore » a data-quality efficiency of 99.85%. Detailed studies have been made of the leakage current in SCT modules and the evolution of the full depletion voltage, which are used to study the impact of radiation damage to the modules.« less

We measured the radiation tolerance of commercially available diamonds grown by the Chemical Vapor Deposition process by measuring the charge created by a 120 GeV hadron beam in a 50 μm pitch strip detector fabricated on each diamond sample before and after irradiation. We irradiated one group of samples with 70 MeV protons, a second group of samples with fast reactor neutrons (defined as energy greater than 0.1 MeV), and a third group of samples with 200 MeV pions, in steps, to (8.8±0.9) × 1015 protons/cm2, (1.43±0.14) × 1016 neutrons/cm2, and (6.5±1.4) × 1014 pions/cm2, respectively. By observing the chargemore » induced due to the separation of electron–hole pairs created by the passage of the hadron beam through each sample, on an event-by-event basis, as a function of irradiation fluence, we conclude all datasets can be described by a first-order damage equation and independently calculate the damage constant for 70 MeV protons, fast reactor neutrons, and 200 MeV pions. We find the damage constant for diamond irradiated with 70 MeV protons to be 1.62±0.07(stat)±0.16(syst)× 10−18 cm2/(p μm), the damage constant for diamond irradiated with fast reactor neutrons to be 2.65±0.13(stat)±0.18(syst)× 10−18 cm2/(n μm), and the damage constant for diamond irradiated with 200 MeV pions to be 2.0±0.2(stat)±0.5(syst)× 10−18 cm2/(π μm). The damage constants from this measurement were analyzed together with our previously published 24 GeV proton irradiation and 800 MeV proton irradiation damage constant data to derive the first comprehensive set of relative damage constants for Chemical Vapor Deposition diamond. We find 70 MeV protons are 2.60 ± 0.29 times more damaging than 24 GeV protons, fast reactor neutrons are 4.3 ± 0.4 times more damaging than 24 GeV protons, and 200 MeV pions are 3.2 ± 0.8 more damaging than 24 GeV protons. We also observe the measured data can be described by a universal damage curve for all proton, neutron, and pion irradiations we performed of Chemical Vapor Deposition diamond. Finally, we confirm the spatial uniformity of the collected charge increases with fluence for polycrystalline Chemical Vapor Deposition diamond, and this effect can also be described by a universal curve.« less

The combination of measurements of the W boson polarization in top quark decays performed by the ATLAS and CMS collaborations is presented. The measurements are based on proton-proton collision data produced at the LHC at a centre-of-mass energy of 8 TeV, and corresponding to an integrated luminosity of about 20 fb$$^{−1}$$ for each experiment. The measurements used events containing one lepton and having different jet multiplicities in the final state. The results are quoted as fractions of W bosons with longitudinal (F$$_{0}$$), left-handed (F$$_{L}$$), or right-handed (F$$_{R}$$) polarizations. The resulting combined measurements of the polarization fractions are F$$_{0}$$ = 0.693more » ± 0.014 and F$$_{L}$$ = 0.315 ± 0.011. The fraction F$$_{R}$$ is calculated from the unitarity constraint to be F$$_{R}$$ = −0.008 ± 0.007. These results are in agreement with the standard model predictions at next-to-next-to-leading order in perturbative quantum chromodynamics and represent an improvement in precision of 25 (29)% for F$$_{0}$$ (F$$_{L}$$) with respect to the most precise single measurement. A limit on anomalous right-handed vector (V$$_{R}$$), and left- and right-handed tensor (g$$_{L}$$, g$$_{R}$$) tWb couplings is set while fixing all others to their standard model values. The allowed regions are [−0.11, 0.16] for V$$_{R}$$, [−0.08, 0.05] for g$$_{L}$$, and [−0.04, 0.02] for g$$_{R}$$, at 95% confidence level. Limits on the corresponding Wilson coefficients are also derived.[graphic not available: see fulltext]« less

We have measured the radiation tolerance of chemical vapor deposition (CVD) diamond against protons and neutrons. The relative radiation damage constant of 24 GeV protons, 800 MeV protons, 70 MeV protons, and fast reactor neutrons is presented. The results are used to combine the measured data into a universal damage curve for diamond material.

At present most experiments at the CERN Large Hadron Collider (LHC) are planning upgrades in the next 5-10 years for their innermost tracking layers as well as luminosity monitors to be able to take data as the luminosity increases and CERN moves toward the High Luminosity-LHC (HL-LHC). These upgrades will most likely require more radiation tolerant technologies than exist today. As a result this is one area of intense research, and Chemical Vapour Deposition (CVD) diamond is one such technology. CVD diamond has been used extensively in beam condition monitors as the innermost detectors in the highest radiation areas ofmore » all LHC experiments. This talk describes the preliminary radiation tolerance measurements of the highest quality polycrystalline CVD material for a range of proton energies and neutrons obtained with this material with the goal of elucidating the issues that should be addressed for future diamond based detectors. The talk presents the evolution of various semiconductor parameters as a function of dose.« less

This paper presents the combinations of single-top-quark production cross-section measurements by the ATLAS and CMS Collaborations, using data from LHC proton-proton collisions at $$ \sqrt{s} $$ = 7 and 8 TeV corresponding to integrated luminosities of 1.17 to 5.1 fb$$^{−1}$$ at $$ \sqrt{s} $$ = 7 TeV and 12.2 to 20.3 fb$$^{−1}$$ at $$ \sqrt{s} $$ = 8 TeV. These combinations are performed per centre-of-mass energy and for each production mode: t-channel, tW, and s-channel. The combined t-channel cross-sections are 67.5 ± 5.7 pb and 87.7 ± 5.8 pb at $$ \sqrt{s} $$ = 7 and 8 TeV respectively. Themore » combined tW cross-sections are 16.3 ± 4.1 pb and 23.1 ± 3.6 pb at $$ \sqrt{s} $$ = 7 and 8 TeV respectively. For the s-channel cross-section, the combination yields 4.9 ± 1.4 pb at $$ \sqrt{s} $$ = 8 TeV. The square of the magnitude of the CKM matrix element V$$_{tb}$$ multiplied by a form factor f$$_{LV}$$ is determined for each production mode and centre-of-mass energy, using the ratio of the measured cross-section to its theoretical prediction. It is assumed that the top-quark-related CKM matrix elements obey the relation |V$$_{td}$$|, |V$$_{ts}$$| ≪ |V$$_{tb}$$|. All the |f$$_{LV}$$V$$_{tb}$$|$$^{2}$$ determinations, extracted from individual ratios at $$ \sqrt{s} $$ = 7 and 8 TeV, are combined, resulting in |f$$_{LV}$$V$$_{tb}$$| = 1.02 ± 0.04 (meas.) ± 0.02 (theo.). All combined measurements are consistent with their corresponding Standard Model predictions.« less

This paper presents combinations of inclusive and differential measurements of the charge asymmetry (A$$_{C}$$) in top quark pair $$ \left(\mathrm{t}\overline{\mathrm{t}}\right) $$ events with a lepton+jets signature by the ATLAS and CMS Collaborations, using data from LHC proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. The data correspond to integrated luminosities of about 5 and 20 fb$$^{−1}$$ for each experiment, respectively. The resulting combined LHC measurements of the inclusive charge asymmetry are A$$_{C}^{CHC7}$$  = 0.005 ± 0.007 (stat) ± 0.006(syst) at 7 TeV and A$$_{C}^{CHC8}$$  = 0.0055 ± 0.0023 (stat) ± 0.0025 (syst) at 8 TeV. These values, as well as the combination of A$$_{C}$$ measurements as a function of the invariantmore » mass of the $$ \mathrm{t}\overline{\mathrm{t}} $$ system at 8 TeV, are consistent with the respective standard model predictions.« less

Combined ATLAS and CMS measurements of the Higgs boson production and decay rates, as well as constraints on its couplings to vector bosons and fermions, are presented. The combination is based on the analysis of five production processes, namely gluon fusion, vector boson fusion, and associated production with a W or a Z boson or a pair of top quarks, and of the six decay modes H → ZZ, W W , γγ, ττ, bb, and μμ. All results are reported assuming a value of 125.09 GeV for the Higgs boson mass, the result of the combined measurement by themore » ATLAS and CMS experiments. The analysis uses the CERN LHC proton-proton collision data recorded by the ATLAS and CMS experiments in 2011 and 2012, corresponding to integrated luminosities per experiment of approximately 5 fb$$^{−1}$$ at $$ \sqrt{s}=7 $$ TeV and 20 fb$$^{−1}$$ at $$ \sqrt{s}=8 $$ TeV. The Higgs boson production and decay rates measured by the two experiments are combined within the context of three generic parameterisations: two based on cross sections and branching fractions, and one on ratios of coupling modifiers. Several interpretations of the measurements with more model-dependent parameterisations are also given. The combined signal yield relative to the Standard Model prediction is measured to be 1.09 ± 0.11. The combined measurements lead to observed significances for the vector boson fusion production process and for the H → ττ decay of 5.4 and 5.5 standard deviations, respectively. The data are consistent with the Standard Model predictions for all parameterisations considered.« less